***(MUST READ) Getting Started
General Requirement The room in which the Workstation will be installed must meet the following criteria: Operating Temperature: 10ºC to 35ºC (50º to 95...
Mon, 6 Jan, 2020 at 5:10 PM
Before Booting Up Recommended installation environment: 15°C to 30°C (59°F to 86°F) ambient temperature with ventilation cooling or air conditioning equi...
Wed, 27 Nov, 2024 at 9:36 PM
1. Connect the monitor to the workstation with an HDMI cable(GPU card is labeled). Please refer to the figure below for specific connection. Tips: Eac...
Mon, 28 Dec, 2020 at 6:06 PM
ssh ssh is a commonly used Linux remote method. 1. For Linux systems such as MAC, Ubuntu, CentOS, etc., please use the command: ssh -XY username@works...
Wed, 11 May, 2022 at 6:12 PM
Default loaded software What modules are available? The command module avail will show all available modules. [spuser@xgpu1 ~]$ module avail...
Tue, 2 Jul, 2024 at 12:28 AM
The system has loaded the relevant variables of relion by default, enter the command in the terminal: relion can open the GUI interface, and then follow the...
Tue, 10 May, 2022 at 6:34 PM
Cryosparc only allows Non-root account(Normal account) to install, use etc. By default use of spuser account installation, the following operations are all ...
Tue, 8 Oct, 2024 at 6:21 PM